AR438 module helps with interconnection, power supply and load switching, monophasic and triphasic, adding the current measurement capability up to 10A.
Enable input helps for a safe relay disconnection. It is a quick electrical -hardware- disconnection of the relays and is designed to be an auxiliary safety element, so that loads cannot reach the device under test.
The average current is measured with a 10mOhm shunt resistor.
Each power relay has two independent cycle counters for total cycles and dangerous short cycles.
12-Ch 10A-250VAC RCV Power Distribution Unit
- Hardwaregesteuerter Freigabeeingang
- 12 Leistungsrelais mit bis zu 10A 250VAC/DC und 300W oder 2.700VA Schaltleistung
- 12 10-mOhm-Nebenschlusswiderstand
- 6 geschaltete 2-polige Messkanäle
- Einphasig isolierte oder dreiphasige nicht isolierte Schaltmöglichkeiten zum oder vom Prüfling (Leistung oder Last)
- VPC TriPaddle 96-poliger Anschluss
- NI LabView- und TestStand-Treiber
- .NET, C/C++, VB-Treiber
- Weiche Frontplatte für direkte Schnittstelle
- CAN-Steuerung oder Ethernet (mit Ethernet-CAN-Gateway)
- Selbsttestmodul verfügbar
- Größe: Form A
Zusätzliche Information
Location (Fx or RCV) | Receiver |
---|---|
Relay Contacts | SPST |
Switch Type | EMR |
Channels (nr) | 12 |
MAX I (A) | 10 |
MAX Vac (V) | 250 |