The best for I/O and switches test
YAV90096 modules facilitate the rapid implementation of the test of cable harness, contacts, inputs and outputs through the internal generators of current from positive or negative.
The value of the voltage on the test pin depends on the programmed current and the resistance offered by the DUT. The maximum voltage of each pin is programmable between 6 and 24 VDC.
The voltage of each one of the measurement pins monitored in two different modes: comparator at 4VDC or evaluation by analog input with 10-bit resolution.
The measurement range of the analog input is limited between +1V and + 5V. The minimum voltage limitation depends on the multiplexing switches and the maximum on the processor supply voltage.
YAV90096 module is supplied in three different formats. YAV90096 has a 96-pin VPC connector for RCV. The 90096I has the connector for ITA. YAV900962 connections are with flat cable connectors.