Gather different power supplies of your ATE from the back connector and distribute it according to your DUT needs. Make it simple with the safety enable.
YAVAR438 allows the reduction of slots needed for a proper power distribution with embedded enable and monitoring functions.
YAVAR438 module helps with interconnection, power supply and load switching, monophasic and triphasic, adding the current measurement capability up to 10A.
Enable input helps for a safe relay disconnection. It is a quick electrical -hardware- disconnection of the relays and is designed to be an auxiliary safety element, so that loads cannot reach the device under test.
The average current is measured with a 10mOhm shunt resistor. The measurement can be done with the system’s own multimeter.
Each power relay has two independent cycle counters for total cycles and dangerous short cycles.